主要技術特點
1. 該機采用數字控制技術，全自動控制、數字顯示、勻速加荷、加荷速率可調,可測量水泥試塊左右及上下位移變化，并能計算出相應的泊松比及彈性模量。
2. 采用進口HBM傳感器進行壓力測量，配合專用模塊，采集精度更高。
3. 采用進口基恩士激光位移傳感器，測量精度2um，非接觸式測量。
4. 試驗機采用全閉環測量方式，控制精度高。
5. 試驗機采用模塊化結構，對環境適應性強，工作穩定可靠，方便維修。
6. 觸摸式彩色液晶顯示，所有操作集中顯示在15寸顯示屏上，全中文顯示，操作簡便易懂。
7. 采用工業PC主機控制，32G儲存空間，Windows操作系統。
8. 無需三相電源，采用單相電源供電。
STRUCTURAL FEATURES
1.The machine is automatic controlled by the latest digital technology. Data can be ing in digital display and machine achieve adjustable constant speed loading during a test. The distance changes for left and right or up and down of cement stone can be measured .And also can calculate the corresponding Poisson's ratio and elastic modulus.
2. Imported HBM transducers in combination with special modules to achieve pressure measurements, collecting more accurate.
3. Using imported KEYENCE laser displacement sensor measurement accuracy of 2μm, non-contact measurement.
4. Testing machine using closed-loop measurement making high precision.
5. Modularization design , environmental adaptability, stable and reliable, easy to maintenance.
6. Touch-screen color LCD display, all displayed on a 15 inch display screen, all-Chinese ing , operation is simple and easy to understand.
7. Controlled by industrial PC host, 32G storage space, and Windows operating systems.
8. Only single power supply can be used, no need for three power.
主要技術參數：
1、壓力范圍：0-200KN
2、加荷速率范圍：0.1-10KN/S間可調
3、最小加荷起始點：＜1.8KN
4、測量誤差：＜±1%（視值誤差）
5、位移測量值重復精度：2um
6、位移測量范圍：5 ～ -5mm
7、電源電壓：?jiǎn)蜗?/span>220V±10% AC50HZ
8、噪音：＜55dB
9、環境溫度：15-35℃
10、電源功率：1KW
11、體積：96×55×137 cm
注：該機內置油井1（17.9KN/min）油井2（71.7KN/min）及ISO（2.4KN/S）三個常用試驗方案，更加方便油井水泥及建筑水泥強度試驗。
SPECIFICATIONS
1.Pressure range: 0-200KN
2. Loading rate : 0.1-10kN/s
3. Min loading point : ＜1.8kN
4. Measurement accuracy: ＜±1%
5. Displacement measurement repeatability: 2μm
6. Range of displacement measurement : 5~-5mm
7. Power: Single-phase AC 220V(±10%) 50Hz 1 kW
8. Noise: ＜55dB
9. Ambient temperature: 15-35℃
10.Volume ：96×55×137cm
The inside of the machine settings well 1 (17.9kN/min) well 2 (2.4kN/min) and ISO(2.4kN/s) , more convenient to well cement and construction cement for strength testing.
