Probe | Connectors | 12 Way Lemo 2b (Absolute, Bridge and Reflection) and Connection Lemo 00 (for single element absolute probes). Simultaneous probe operation possible using Lemo 12 way and Lemo 00. |
| Rotary | 600-3000 rpm - ETher Mercury Drive (ADR002) and Saturn (ARD001), Hocking 33A100, Rohmann MR3, SR1 and SR2 Drive (special adapter needed) |
| Conductivity | Option becomes active with use of AeroCheck + conductivity probe ａnd cable |
Frequency | Dual Frequency | 10Hz - 12.8MHz |
Gain | Overall | -18 to + 104 dB, 0.1, 1 and 6dB steps |
| Input | 0dB or 12dB |
| Drive | 0dB, 6dB and 12dB (0dB reference 1mW into 50 ohm) |
| Max X/Y Ratio | +/-100.0 dB |
Phase | Range | 0.0-359.9°, 0.1° steps |
Filters | High Pass | DC to 2kHz or Low Pass Filter, which ever is the lower in 1 Hz steps. Plus variable adaptive balance drift compensation 0.01 - 0.5 Hz (6 steps). |
| Low Pass | 1Hz to 2KHz or a quarter of the lowest test frequency whichever is lower in 1 Hz steps. |
Balance | Manual | 14 internal balance loads; 2.2µH, 5.0µH, 6.0µH, 6.5µH, 7.0µH, 7.5µH, 8.2µH, 12µH, 15µH, 18µH, 22µH, 30µH, 47µH, 82µH, |
| Automatic | Optimised balance load selection. |
Mix Channel | Frequency | Full frequency range available on both channels |
| Probe Mode | Simultaneous reflection / bridge and absolute including simultaneous two probe Differential and Absolute |
| Mix Gain | X/Y -18 to +18dB |
| Mix Phase | 0.0-359.9°, 0.1° steps |
Alarms | Box | Fully configurable, Freeze, Tone or visual. |
| Sector | Fully configurable, Freeze, Tone or visual. |
Display | Type | 5.7" (145mm), 18 bit Colour, daylight readable. |
| Viewable Area | 115.2mm (Horizontal) x 86.4mm (Vertical) |
| Resolution | 640 x 480 pixels |
| Flip | Manual or automatic screen orientation change to enable left or right handed use. |
| Colour Schemes | User configurable Dark, Bright and Black & White |
| Configurable screen | Full Screen, Single, Dual Spot or Dual Pane with variable size and location and function e.g. XY, Timebase, Waterfall and Meter. |
| Display Modes | Spot, Time base (0.1-20 seconds x 1-200 sweeps and up to 55 seconds), Waterfall and Meter with peak hold and % readout. |
| Graticules | None, Grid (4 sizes 5, 10,15 and 20% FSH), Polar (4 sizes 5, 10,15 and 20% FSH) |
| Offset | Spot Position: Y =-50 to +50, X =-65 to +65% |
| Digital Spot Position Readout | Display in X,Y or R,θ |
| Summary | Display of all settings in Legacy Format |
Removeable Data Storage | Setup Storage | micro SD up to 32GB, holding over 10,000 settings |
| Stored Screen Shots | micro SD up to 32GB, holding over 10,000 screen shots |
| Recorded Data | micro SD up to 32GB, holding over 500 2.5 minute long data recordings |
| Guides | micro SD up to 32GB, holding 10,000 Slides |
Advanced Features | Data logging | Real-time recording of signal data and Replay on instruments and desktop PC up to 164 seconds |
| Guides | Create and display a slide containing instructions, tutorials and procedures using Microsoft PowerPoint. |
| Attachments | Screenshots and Data Recordings are saved in a folder with the name of the Settings. |
| Loop | Capture a live repetitive signal and then optimise the instrument settings (Phase, Gain, Filters) to simplify optimising the parameters |
| Trace | Allows a calibration reference signal to be stored on the screen and then compared with the live signal |
| Auto Phase | Allows phase angle to be automatically set to a pre set angle |
Outputs | PC Connectivity | USB (Full PC remote control plus Real Time data) |
| Digital volt free alarm | On Lemo 12 way Open collector transistor (36v dc at 10mA max). |
| VGA | Full 15 way VGA output (EC screens only) |
Languages |
| English, French, Spanish, Russian, Japanese, Chinese, Turkish. |
Verification Level |
| The system includes on delivery a 2 year validity Verification Level 2 detailed functional check and calibration as as per ISO 15548-1:2013 |
Power on self test |
| The system performs a self test on start up of external ram, sd ram, accelerometer, Micro SD card, LCD screen buffer. |
Power | External | 100-240 v 50-60Hz 30 Watts |
| Battery | Internal 7.2V nominal @ 3100mAh = 22.32 watt.hr |
| Running Time | Up to 8 hours with a 2MHz Pencil Probe 30% Back Light and up to 6 hours with a Rotary Drive at 3000rpm 50% duty cycle. |
| Charging Time | 2.5 hrs. charge time, Simultaneous charge ａnd operation |
Physical | Weight Including Internal Battery | 1.3 kg, 2.9 lbs. |
| Size (w x h x d) | 237 x 146 x 53 mm / 9.3 x 5.7 x 2.1 inches |
| Material | Aluminium alloy Mg Si 0.5 powder-coated epoxy |
| Operating Temp | -20 to +60 °C |
| Storage Temp | Storage for up to 12 months -20 to +35 °C Nominal +20 °C |
| IP Rating | IP54 |
